No products in the cart.
Rinnai R3655 – High Wind Vert Cowl Protct Kit
$159.99
🏆 Best Price Guaranteed*
🏆 Best Price Guaranteed*
Genuine Rinnai R3655 – High Wind Vert Cowl Protct Kit (Ember Series). Brand new, NZ-wide delivery from NZ Depot.
Discount per Quantity
| Quantity | 1 | 2 - 4 | 5 - 9 | 10 + |
|---|---|---|---|---|
| Discount | 0% | 5% | 8% | 10% |
| Price | $159.99 | $151.99 | $147.19 | $143.99 |
⚠️ Important Compatibility Notice
Please double-check the required specifications with your qualified technician or installer prior to ordering. Due to the technical nature of this product, incorrect orders cannot be exchanged, replaced, or refunded. Thank you for your understanding.
Rinnai R3655 – High Wind Vert Cowl Protct Kit: Genuine Rinnai Trade Supply
You are viewing the Rinnai R3655 – High Wind Vert Cowl Protct Kit (SKU: R3655). This is a 100 percent genuine Rinnai Ember Series Fires & Fireplaces component, engineered for New Zealand homes and commercial sites. Refrigerant: . Cooling capacity: kW. Heating capacity: kW.
Product Details: Rinnai R3655
Rinnai R3655 – High Wind Vert Cowl Protct Kit, part of the Ember Series range. Meet the Rinnai Ember, Compact Series Fireplace. The small gas fire. Genuine Rinnai New Zealand product, brand new, supplied through Rinnai NZ’s trade channel.
Rinnai R3655 — Specifications
| Product Overview | |
| Product | High Wind Vert Cowl Protct Kit |
| Rinnai Part Number | R3655 |
| Product Range | Ember Series |
| Category | Home Heating > Fires & Fireplaces > Flueing Components |
| Brand | Rinnai |
| Technical Specifications | |
| Gas type | Available for Natural Gas or LPG, specify at the time of purchase |
| Convection fan | 120 V AC 50 Hz 2-speed centrifugal blower. Heat is distributed from the top of the appliance. |
| Data plate | Located on the lower RHS of the base panel, in front of the gas control. |
| Gas connection | Brass ½ ” BSPT male fitting. The gas supply terminates inside the heater, lower RHS of the appliance. |
| Ignition | 230-240 V AC 50 HZ high voltage electronic spark generation unit. |
| Noise level | 37-45 dB(A) |
| Flueing – masonry | Colinear flexi flue, air intake Ø 75 mm, exhaust Ø 100 mm. Appliance must be installed with a Rinnai Ember flue system.; Refer below comment regarding the DV high wind vertical cowl protection kit. |
| Flueing – mock chimney | Colinear (air intake Ø75 mm, exhaust Ø100 mm) to coaxial direct vent flueing (inner Ø100 mm, outer Ø170 mm). Appliance must be installed with a Rinnai Ember flue system.; N.B; : For windy areas such as Wellington, coastal properties, and elevated properties on hills we recommend an additional flue component call the DV high wind vertical cowl protection kit (R3655). It is designed to wrap around the flue cowl to reduce wind entering the flue and causing flame disturbances. Refer to the installation instructions in the ‘Downloads’ tab for more information. |
| Power consumption | High 110 W; Standby < 1 W; The Ember has a 1.5 m power cord with a 3-pin plug supplied. The power cord passes through a slot in the back right hand corner of the appliance. |
| Safety devices | Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector. |
| Temperature control | Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app. |
| Weights | Ember 600 – 51 kg; Ember 700 – 55 kg |
| General clearances | The minimum clearances listed below are measured from the edge of the outer glass.; Above – 400 mm; Sides – 400 mm (includes side walls); In front – 1000 mm |
| Dimensions | These are the unit dimensions only, not the framing/cavity dimensions; Ember 600: A-640 mm, B-644 mm, C-618 mm, D-580 mm; Ember 700: A-740 mm, B-644 mm, C-618 mm, D-680 mm; Viewable glass dimensions; – Ember 600: 535 (w) x 500 (h) mm; – Ember 700: 638 (w) x 500 (h) mm |
| Compliance | Energy Safety Supplier Declaration of Compliance: Declaration number – 1810620176 |
| Market release | June 2017 |
Documents & Downloads
- 📄 Gas fireplace & home heating brochure
- 📄 Ember Series ordering guide
- 📄 Gas fireplace spec guide
- 📄 Ember operation guide
- 📄 Ember installation guide
- 📄 Ember product technical statement
- 📄 DV high wind vertical cowl protection kit (R3655) installation
- 📄 Ember mock chimney zero clearance frame installation
- 📄 Ember mock chimney horizontal flue kit installation
- 📄 Ember 600 burn media sheet on unit
✔ Full Rinnai NZ Manufacturer Warranty — genuine Rinnai New Zealand product. Warranty & after-sales support.
Every Rinnai product sold by NZ Depot is brand new and dispatched NZ-wide. Order online today or contact NZ Depot for trade pricing and availability.
Need advice or trade pricing? Contact NZ Depot or browse more hot water, heating and HVAC deals at NZ Depot.
Pro Tip: Ensure this R3655 matches your installation. Sourced directly from the Rinnai NZ supply chain for full compatibility and manufacturer warranty.
The NZ Depot Trade Supply Advantage
🏭
No Showroom Markup
Direct trade pricing on every Rinnai unit. You pay for the product, not the overheads.
🚚
Nationwide Dispatch
From Cape Reinga to Bluff. Routed from the nearest distribution hub for fastest delivery.
Downloads and Documents
Trade and Installation FAQ
Is the Rinnai R3655 – High Wind Vert Cowl Protct Kit suitable for New Zealand conditions?
Yes. The R3655 is engineered for the climate ranges experienced across New Zealand and is sold and supported by Rinnai NZ.
Does this unit require professional installation?
Yes. To preserve your manufacturer warranty, all refrigerant-based Rinnai equipment must be installed by a licensed New Zealand HVAC technician.
What refrigerant does the R3655 use?
This unit uses refrigerant, which is the modern, low-GWP standard for residential and light commercial heat pumps in New Zealand.
Looking for the best price on the Rinnai R3655? NZ Depot supplies the Rinnai R3655 New Zealand wide with fast dispatch, trade pricing and genuine Rinnai warranty support. Compare the Rinnai R3655 – High Wind Vert Cowl Protct Kit with the rest of the Rinnai Ember Series range, check the full specifications above, and order the Rinnai R3655 online today or request a trade quote for volume supply.
Browse the full range of Home Heating available for NZ-wide trade and retail supply.
© 2026 NZ Depot Limited. All Rights Reserved. | 100% NZ Owned and Operated. | Authorised Rinnai Trade Supplier.
Additional information
| Weight | 0.5 kg |
|---|---|
| MPN | |
| Brand | |
| Copper Pipe (mm) | |
| Series | |
| Unit Type |
Only logged in customers who have purchased this product may leave a review.

Reviews
There are no reviews yet