No products in the cart.
Brazing tools and rods
-
Supercool Viper Wetrag Heatshield RT420H | Brazing Tools And Rods
Turn off or disconnect all power.For your safety always was proper PPE, welding clothing, safety goggles, and face shields.Prepare WetRag® HeatShield. Soak in water for use in high-temperature applications or use dry for lower-temperature applications.Place HeatShield in the required area to protect from flame damage, conductive heat transfer, or welding sparks.Solder, braze, or weld. NOTE: Welding techniques and applications vary. If necessary, use additional safeguards or materials such as Viper WetRag® Heat Blocking Putty to protect components. Always use proper flame temperature and flow nitrogen for added protection.Allow WetRag® HeatShield and surrounding areas to cool.If used wet, hang dry or machine wash on low/delicate separate from other laundry. Dry on normal cycle separate from other laundry. Suitable for welding, soldering and brazing applications. Protects wood, insulation, studs, walls, flooring, valves, painted surfaces, metal, pipe, and other components or surfaces from damage.
$285.99$519.98 -
Viper Heat Blocking Gel RT410S | Brazing Tools And Rods
Viper Heat Blocking Gel is a thermal adsorption compound that will prevent heat damage to components during low temperature soldering or brazing. Use as a fire retardant around walls and surrounding areas when using an open flame.Used Where:Low Temperature Soldering or Brazing: Coat piping with a long and thick layer of gel to protect heatsensitive components from damage. For high temperature brazing or soldering we recommend using ourViper Heat Blocking Putty (Part # RT400P).Fire Protection: Spray coat all surrounding areas to prevent fire or damage to materials from heat oropen flame.Please review all directions below and on the label.Directions:1. Shake bottle well. Spray a thick layer of Viper Heat Blocking Gel onto components and allsurrounding areas that may come in contact with direct flame or heat transfer.2. Solder or weld. Use a low flame and flow nitrogen for added protection.3. Allow surfaces to cool or spray additional Viper Heat Blocking Gel on a heated surface to cool itfaster.
$120.99$219.98Viper Heat Blocking Gel RT410S | Brazing Tools And Rods
$120.99$219.98 -
CPS Nitrogen Regulator Psi/Kpa 20-600 BRRN2A | Brazing Tools And Rods
PRO-SET Nitrogen RegulatorUL ListedDelivery Pressure 0-400 PSIEasy-to-read gauges with protective rubber gauge boots
$703.99$1,279.98 -
Bromic Mapp Gas Mg9 MG9 | Brazing Tools And Rods
Bernzomatic 400g MAP-Pro CylinderWork faster and more efficiently with a higher burn temperature than standard propane. The Bernzomatic MAP-Pro Cylinder contains premium fuel suited for a variety of industrial and trade applications including soldering large copper pipes, brazing and heat treating. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and manoeuvre. The 400g Bernzomatic MAP-Pro Cylinder has a flame temperature in air of 1982°C and is designed for use with MAP-Pro Hand Torches.Use with hand torches designed for MAP-Pro fuel, including Bernzomatic torchesCGA600 thread connectionFlame temperature in air is 1982°CHigher heat characteristics than propaneDelivers a quicker flame temperatureIdeal for medium to heavy soldering and brazingSlim, lightweight design is easy to handle and work withConstructed from durable steel
$65.99$119.98Bromic Mapp Gas Mg9 MG9 | Brazing Tools And Rods
$65.99$119.98 -
Russell International Cont. La Co Heat Seal Stick 11575 | Brazing Tools And Rods
Sealing temperature: up to 350°F (177°C)Pressure: to 600 PSI (41 BAR)Repair pinhole leaks and get refrigeration system running again without having to replace an entire applianceNo mixing of epoxy compounds, heat activation saves time on the jobFast repairs completed in 90 secondsMade in U.S.A. Refrigeration coils are prone to pinhole leaks and hairline cracks. Heat-Seal Stik was specifically made to seal these small holes for an immediate fix, even if the appliance will need to be replaced eventually. Heat-Seal Stik works with heat – no mixing of epoxy compounds necessary
$76.99$139.98 -
Cps Por Set Brazing Hand Torch BRHT1 | Brazing Tools And Rods
PRO-SET HAND TORCHAuto-ignite torchAdjustable flame controlFor use with propylene (MAPPRO), MAPP and PropaneCGA600 Inlet ConnectionCast aluminum and stainless steel burn tube constructionFlame lock button, precise flame adjustmentClamshell packaging
$296.99$539.98 -
Cps – Leak Stop For A/C & Refrigeration Systems OPV2013C1 | Brazing Tools And Rods
CPS – Leak Stop for A/C & Refrigeration systems
$164.99$299.98 -
Bromic Brazing Hand Torch With Ignitor Benzomatic TS8000BT | Brazing Tools And Rods
The Bernzomatic® DuraCast® 8000 Torch is built with instant on/off ignition, an adjustable ultra-swirl flame and flame lock option for continuous use. It is designed for use at any angle and is pressure-regulated to reduce the risk of pulsating or yellow flames when inverted, making it ideal for large diameter soldering, light brazing, woodworking and cooking. The DuraCast® 8000 Torch is compatible with Bernzomatic MAP-Pro® fuel and Bernzomatic Propane fuel, sold separately.
$296.99$539.98 -
Johnson Matthey Brazing Alloy Easy-Flo 34% 1.5Mm X 750Mm (1Kg) EF3416 | Brazing Tools And Rods
BRAZING ALLOY Easy-Flo 34% 1.5mm x 750mm (1Kg)
$43.99$79.98 -
Johnson Matthey Brazing Alloy 15% 2.4Mm X 750Mm Stick (Each) P15 | Brazing Tools And Rods
BRAZING ALLOY 15% 2.4mm x 750mm Stick (Each)
$54.99$99.98 -
Johnson Matthey Brazing Alloy 15% 2.4Mm X 750Mm (1Kg Pack) P15-1KG | Brazing Tools And Rods
BRAZING ALLOY 15% 2.4mm x 750mm (1Kg Pack)
$1,715.99$3,119.98
Brazing tools and rods are a crucial component for any project. At NZ Depot, we offer a curated selection of top-brand Brazing tools and rods known for their reliability and performance. Explore our collection and enjoy fast, nationwide delivery.