-
Danfoss Differential Pressure Switch, Rt262A 017D002566 | Oil Management
RT262A Diff. Pressure Switch M/9
$3,761.99$6,839.98Danfoss Differential Pressure Switch, Rt262A 017D002566 | Oil Management
$3,761.99$6,839.98 -
Parker Tko Acid Test Kit TKO | Lubricants
Parker Hannifin Acid TestOne bottle test kit is a simple and cost effective method of determining whether the acid level is within an acceptable range for mineral or alkylbenzene lubricants. Simply fill the bottle with oil to the line on bottle neck and shake.Features:Ultra-sensitive color change guarantees an accurate test, marginal conditions cause partialcolor changesIf the test remains purple, oil is safe. If it turns yellow, acid is too highFor use with mineral and alkylbenzenelubricantsColor comparison chart in every boxInexpensive to use – billable test
$65.99$119.98Parker Tko Acid Test Kit TKO | Lubricants
$65.99$119.98 -
Parker Etk Poe Acid Test Kit ETK | Lubricants
Parker Hannifin Refrigeration Oil Acid Test KitSimilar to the TKO test kit, but formulated for POE lubricants. Designed specifically for use with polyol ester lubricants. Test for acid contamination in the compressor’s crankcase which can be indicative of lubricant decomposition.Features:Adjusted for the higher acid levels of POE lubricantsIf test remains purple, the oil is safe. If it turns yellow, acid is too highUltra-sensitive color change guarantees an accurate test. Marginal conditions cause partial color changesColor comparison chart in every boxEasiest way of determining if the acid level of polyol ester (POE) compressor lubricants is considered safe or too acidic. POE lubricants are actually created by reacting an alcohol with an acid. Although the total acid numbers are higher than in comparable mineral oils, the chemical make-up of POE lubricants keeps this number relatively low. However, this lubricant can break down into its acid and alcohol componentseither from excessive heat such as a motor burn-out or high discharge temperatures, or with excessive system moisture. This acid can cause damage to a system and may eventually cause the system to fail prematurely. It is important that such a condition bediagnosed early and that system be cleaned up according to proper industry procedures.
$65.99$119.98Parker Etk Poe Acid Test Kit ETK | Lubricants
$65.99$119.98 -
$1,869.99
$3,399.98Lubrizol Corporation Emkarate – R170H Oil 20L RL170H-20.0 | Lubricants
$1,869.99$3,399.98 -
$725.99
$1,319.98Supercool Checkmate Contamination Detector Kit RT700K | Lubricants
$725.99$1,319.98 -
HighSide Chemicals Acid Test Kit Highside- Suitable For All Oils (4 Tests Per Kit) 16001 | Lubricants
4 oz Canister w/(4) test Kit Item #16001 – 12 per CaseThe Acid Test Kit is crafted for on-site and in the field use, providing swift and reliable acid level measurements in AC and refrigeration systems. This kit delivers accurate results within seconds and requires only a small oil sample.
$76.99$139.98 -
Danfoss 175Pz Poe Lubricant 2.5 L 120Z0639 | Lubricants
LUBRICANT 175PZ-2.5L CAN
$648.99$1,179.98Danfoss 175Pz Poe Lubricant 2.5 L 120Z0639 | Lubricants
$648.99$1,179.98 -
Danfoss 160Sz Oil 120Z0571 | Lubricants
POE lubricant, 160SZ, 2.5-litre can
$549.99$999.98Danfoss 160Sz Oil 120Z0571 | Lubricants
$549.99$999.98 -
$538.99
$979.98Danfoss Wvs 50; Wvts 50 016D0083 | Line Components
$538.99$979.98 -
$2,254.99
$4,099.98Danfoss Wvs 50; Wvts 50 016D0061 | Line Components
$2,254.99$4,099.98 -
$87.99
$159.98Danfoss Wvs 50; Wvts 50 016D0576 | Line Components
$87.99$159.98 -
Johnson Controls Water Regulating Valve 1-1/4 F.P.T. Johnson V46-AE-9600 | Line Components
Pressure Controlled Modulating Valves for Fresh Water and Glycol Mixtures.All valves can be used for R134a, R507/R404A.Connection of pipes inside: G ISO R228.Max pressure on the refrigerant side 28 bar, however take into account current working pressure.Max pressure on the water side 10 bar in the range -20/+90 °C.
$1,649.99$2,999.98 -
Packless Vibration Eliminator 5/8 In Od VAFS5 | Line Components
Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor induced vibration through system piping.Packless vibration absorbers are recognized under the component programs of Underwriter’s Laboratories for application on both refrigerant suction and discharge lines.Packless vibration absorbers are compatible with all CO2, HC, HFO, HFC, HCFC and CFC refrigerants.
$142.99$259.98
- Services
- Air Conditioner Heat Pump & Maintenance Service
- Commercial HVAC Quotation Enquiry Form
- Electrical Quotation Enquiry Form
- EV Charger Installation
- Technician / Installer Registration Form
- Renovation – NZ DEPOT
- Supplier or Merchant Registration
- Construction
- Carpet with Installation Service
- Free Quote
- Interest Free Finance
- Daikin Heat Pumps
- Brands
- Free Quote














