No products in the cart.
Metal axial in-line Fan VKF350 4E 694FIDl/s - Commercial Fans - VEVKF4E350
Image is for illustration only. Please go by the model number (SKU: VEVKF4E350).
-43%Roll over image to zoom in
$991.98$1,728.98 (-43%)
Price Match*
Price Match*
Discount per Quantity
| Quantity | Discount | Price |
|---|
| 1 - 4 | 0% | $991.98 | |
| 5 - 9 | 8% | $912.62 | |
| 10 - 19 | 12% | $872.94 | |
| 20 + | 18% | $813.42 |
⚠️ Important Compatibility Notice
Please double-check the required specifications with your qualified technician or installer prior to ordering. Due to the technical nature of this product, incorrect orders cannot be exchanged, replaced, or refunded. Thank you for your understanding.
Professional HVAC Component: Metal axial in-line Fan VKF350 4E 694FIDl/s
You are viewing the Metal axial in-line Fan VKF350 4E 694FIDl/s (SKU: VEVKF4E350). A professional-grade component from the Commercial Fans series, engineered for New Zealand’s residential and commercial ventilation systems. Sourced directly from our trade supply chain for NZ Depot.
⚠️
Technical Verification Required
Ventilation components require precise sizing. Please verify that this VEVKF4E350 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.
Key Specs:
Category: Commercial Fans
Type: VKF axial in-line fan (extract or supply)
Product Specifications
The VEVKF Series Axial Duct Fans provide high airflow performance in a robust steel casing. Designed for low-pressure ventilation systems, these in-duct fans deliver large air volumes with reliable, continuous operation.
Application
Suitable for combined supply and exhaust ventilation systems in a wide range of commercial, industrial, and utility premises. Ideal where high air capacity is required at relatively low system resistance, including warehouses, workshops, and plant rooms.
Features / Benefits
- Low-pressure axial fan for high-capacity ventilation systems
- Steel casing and impeller with protective polymer coating for durability
- Two- or four-pole, single- or three-phase asynchronous motor with external rotor (model dependent)
- Built-in thermal overheating protection and ball bearings rated for at least 40 000 hours of service life
- IP44 motor protection rating for reliable operation in demanding environments
- Smooth or step speed control using thyristor or autotransformer controllers
- Multiple fans can be connected to a single controller within rated load limits
- In-duct mounting via connecting flanges
- External terminal box on the fan casing for straightforward electrical connection
| VEVKF4E350 | |
| Air Capacity, m?/h | 1340 |
| Air Capacity, L/s | 372 |
| Sound Level 3m, dBA | 44 |
| RPM | 1350 |
| Power, W | 75 |
| Consumption Current, A | 0.35 |
| Voltage, V | 230 |
| Maximum Temperature, ?C | 60 |
| Protection Class | IPX4 |
Products specifications
| Attribute name | Attribute value |
|---|---|
| Fan Specifications | |
| Application | Commercial, Industrial |
| Installation Location | Ducting |
| Shape | Circle |
| Materials | Polymer-Coated steel |
| Colour | Blue |
| Spigot Diameter (mm) | 362 Ø |
| Outer Diameter (mm) | 421 Ø |
| Length (mm) | 160 |
| Width (mm) | 450 |
| Weight (kg) | 7.7 |
Professional HVAC Supply: Metal axial in-line Fan VKF350 4E 694FIDl/s
You are viewing the Metal axial in-line Fan VKF350 4E 694FIDl/s (SKU: VEVKF4E350). A critical component within our Commercial Fans range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from our trade supply chain for NZ Depot.
⚠️
Important: Measurement Verification
HVAC components require precise sizing. Please confirm this VEVKF4E350 model matches your engineer’s specifications before ordering.
Dimensions: Length: 160mm | Width: 362mm | Height: 362mm.
Technical Specifications & Features
The VEVKF Series Axial Duct Fans provide high airflow performance in a robust steel casing. Designed for low-pressure ventilation systems, these in-duct fans deliver large air volumes with reliable, continuous operation.
Application
Suitable for combined supply and exhaust ventilation systems in a wide range of commercial, industrial, and utility premises. Ideal where high air capacity is required at relatively low system resistance, including warehouses, workshops, and plant rooms.
Features / Benefits
- Low-pressure axial fan for high-capacity ventilation systems
- Steel casing and impeller with protective polymer coating for durability
- Two- or four-pole, single- or three-phase asynchronous motor with external rotor (model dependent)
- Built-in thermal overheating protection and ball bearings rated for at least 40 000 hours of service life
- IP44 motor protection rating for reliable operation in demanding environments
- Smooth or step speed control using thyristor or autotransformer controllers
- Multiple fans can be connected to a single controller within rated load limits
- In-duct mounting via connecting flanges
- External terminal box on the fan casing for straightforward electrical connection
| VEVKF4E350 | |
| Air Capacity, m?/h | 1340 |
| Air Capacity, L/s | 372 |
| Sound Level 3m, dBA | 44 |
| RPM | 1350 |
| Power, W | 75 |
| Consumption Current, A | 0.35 |
| Voltage, V | 230 |
| Maximum Temperature, ?C | 60 |
| Protection Class | IPX4 |
Products specifications
| Attribute name | Attribute value |
|---|---|
| Fan Specifications | |
| Application | Commercial, Industrial |
| Installation Location | Ducting |
| Shape | Circle |
| Materials | Polymer-Coated steel |
| Colour | Blue |
| Spigot Diameter (mm) | 362 Ø |
| Outer Diameter (mm) | 421 Ø |
| Length (mm) | 160 |
| Width (mm) | 450 |
| Weight (kg) | 7.7 |
About the VKF axial in-line fan (extract or supply) Series
Combined supply and exhaust ventilation systems for various premises where high air capacity at relatively low system resistance is required.
Can be used for the direct air exhaust or pressurization in smoke ventilation systems
Suitable for outdoor wall mounting
2E = 2 pole, 1 phase
4E = 4 pole, 1 phase
All fans are single phase, 3 phase readily available
Additional information
| Weight | 7.7 kg |
|---|---|
| Dimensions | 160 × 362 × 362 mm |
| MPN | |
| Application | |
| Material | |
| Shape | |
| Colour |
Reviews
30%
70%
0%
0%
0%
Only logged in customers who have purchased this product may leave a review.
Lynne –
Really good value
Eleanor –
Valued customer experience
Millie –
Highly fantastic product service
Kenneth –
Wonderful service quality
Delilah –
Fast delivery
Mark –
Best purchase
Christine –
Highly satisfied with item product
Jennifer –
Best purchase ever
Ruby –
Very pleased with product buy
Lynne –
Great quality