Lubricants

  • $91.99$223.97
  • NU-CALGON Lubricant – Emkarate Rl85Hb 5.0 Ltr Oil RL85HB-5.0 | Lubricants

    Lubricant – Emkarate RL85HB 5.0 ltr oil4316-91The industry’s choice of a fully formulated polyol ester lubricantMost OEM approved, recognizable POE lubricant in the marketSome approvals: RL32-3MAF/RL68HB for Copeland, Caryle’s RL68H, and RL85HB for BitzerFor HCFC, HFC, HFO, hydrocarbon and CO2 refrigerantsCompatible with mineral oils, alkylbenzenes, PVE and PAG lubricantsA2L Ready

    $615.99$1,119.98
  • Parker Tko Acid Test Kit TKO | Lubricants

    Parker Hannifin Acid TestOne bottle test kit is a simple and cost effective method of determining whether the acid level is within an acceptable range for mineral or alkylbenzene lubricants. Simply fill the bottle with oil to the line on bottle neck and shake.Features:Ultra-sensitive color change guarantees an accurate test, marginal conditions cause partialcolor changesIf the test remains purple, oil is safe. If it turns yellow, acid is too highFor use with mineral and alkylbenzenelubricantsColor comparison chart in every boxInexpensive to use – billable test

    $65.99$119.98
  • Parker Etk Poe Acid Test Kit ETK | Lubricants

    Parker Hannifin Refrigeration Oil Acid Test KitSimilar to the TKO test kit, but formulated for POE lubricants. Designed specifically for use with polyol ester lubricants. Test for acid contamination in the compressor’s crankcase which can be indicative of lubricant decomposition.Features:Adjusted for the higher acid levels of POE lubricantsIf test remains purple, the oil is safe. If it turns yellow, acid is too highUltra-sensitive color change guarantees an accurate test. Marginal conditions cause partial color changesColor comparison chart in every boxEasiest way of determining if the acid level of polyol ester (POE) compressor lubricants is considered safe or too acidic. POE lubricants are actually created by reacting an alcohol with an acid. Although the total acid numbers are higher than in comparable mineral oils, the chemical make-up of POE lubricants keeps this number relatively low. However, this lubricant can break down into its acid and alcohol componentseither from excessive heat such as a motor burn-out or high discharge temperatures, or with excessive system moisture. This acid can cause damage to a system and may eventually cause the system to fail prematurely. It is important that such a condition bediagnosed early and that system be cleaned up according to proper industry procedures.

    $65.99$119.98
  • $494.99$899.98
  • $131.99$239.98
  • $560.99$1,019.98
  • $2,045.99$3,719.98
  • $142.99$259.98
  • $131.99$239.98
  • $1,869.99$3,399.98
  • $725.99$1,319.98
  • HighSide Chemicals Acid Test Kit Highside- Suitable For All Oils (4 Tests Per Kit) 16001 | Lubricants

    4 oz Canister w/(4) test Kit Item #16001 – 12 per CaseThe Acid Test Kit is crafted for on-site and in the field use, providing swift and reliable acid level measurements in AC and refrigeration systems. This kit delivers accurate results within seconds and requires only a small oil sample.

    $76.99$139.98
  • $648.99$1,179.98
  • Danfoss 160Sz Oil 120Z0571 | Lubricants

    POE lubricant, 160SZ, 2.5-litre can

    $549.99$999.98
  • $68.99$167.97
  • $57.49$139.97
  • $2,966.99$7,223.97

    Bitzer OIL BSE85 10 LITRE

    $2,966.99$7,223.97
  • $540.49$1,315.97
  • $436.99$1,063.97
  • $114.99$279.97
  • $68.99$167.97
  • $1,218.99$2,967.97

    Bitzer OIL BVC32 5 LITRE

    $1,218.99$2,967.97
  • $574.99$1,399.97

    Bitzer OIL BVC32 1 LITRE

    $574.99$1,399.97

Main Menu