Subtotal:
$4,597.99
Parker
-
$8,667.99
$15,759.98Parker Rsf Strainers 4″ Less Gaskets And Flanges 100012 | Industrial Valves
$8,667.99$15,759.98 -
Parker Flocon A82-54 – Epr, 2-5/8 F.Sw Conn, 2-1/8 Port 102927 | Line Components
The A8 has a unique modular design that allows the commercial pressure regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be created, while pilot adaptors can be changed out to add features or even change functions. Thus, retrofitting for additional evaporator capacity, heat reclaim, or hold back for hot gas defrost is simple and requires no pipe line revisions under most circumstances. These valves will modulate to maintain a pressure as set for in the field, in spite of fluctuations in load, changes in ambient, changes in available refrigerant flow paths, and other operating variances. Appropriately sized, these valves will modulate the flow of liquid or vapor, high side or low side in a wide variety of system arrangements used in industrial, commercial and air conditioning installations. Models are available in combinations of connection sizes, port sizes, functions and features as designated by the model code, for application in a wide variety of control functions on industrial, commercial and air conditioning systems.Three control functions are available:Inlet, Outlet, and Differential pressure control. Two control features can be added by incorporating pilot solenoids; either Electric Shut-Off(S) or Electric Bypass (B); also called Wide-Opening.The valves are an integrated assembly of four modules:1) A body, which contains no moving parts, but is ordered to suit a particular connection size;2) A capacity cartridge, which contains both piston and modulating plug, and defines the Port Size;3) A pilot adapter, which defines the valve function and onto which the Pilot Solenoids providing either the “S” or “B” feature are added as required;4) The bonnet, containing the Range Spring and adjustment screw, which mechanisms are set for the value of pressure which the valve is to maintain
$7,083.99$12,879.98Parker Flocon A82-54 – Epr, 2-5/8 F.Sw Conn, 2-1/8 Port 102927 | Line Components
$7,083.99$12,879.98 -
Parker Solenoid Valve – S5A-50 2″ No Flanges Or Coil 100982 | Industrial Valves
Parker’s S5A is a low pressure drop gravity closing valve ideal for medium temperature suction applications. The low-pressure drop provided by the S5A ensures that losses are kept to a minimum, which is especially important in refrigeration suction lines. This heavy-duty solenoid valve is suitable for Ammonia and other refrigerants, certain oils and other fluids approved for use in refrigeration. The S5A is a pilot operated semi-steel bodied valve. The valve may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S5A Solenoid Valve is furnished with FPT: Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solders over copper tubing of given diameter) connections. The valve may be easily removed from between the flanges for servicing.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• Standard Coil Housing Meets NEMA 3R and NEMA 4 – Rain Tight• Coil Housing Surpasses NEMA Salt Spray Test• Plunger-Needle Assembly Same for S4A, S5A, S6N, S6A, S8F• Replaceable Piston Plug Assembly• Molded Class “F” Coil Construction• Pilot Light Available• Stainless Steel Needle• Manual Opening Stem• MOPD 20.7 bar (300 PSIG)• 27.6 bar (400 PSIG) maximum rated pressure (MRP)Application:• Refrigerant Liquid Lines• Suction Lines• NOT for Hot Gas Lines or other applications where high pressure drops will exist when valve is open.
$6,665.99$12,119.98Parker Solenoid Valve – S5A-50 2″ No Flanges Or Coil 100982 | Industrial Valves
$6,665.99$12,119.98 -
Parker Ck4A-16 4″ Check Valve – Less Flanges And Gaskets 101054 | Industrial Valves
Parker’s CK4 check valves are designed to be close coupled to a control valve which will reduce overall installation length, complexity, and cost. These valves are designed to prevent backflow in a variety of refrigeration applications and can be mounted on a valve or as a standalone component. The CK4 can be mounted in any orientation when used as a standalone part of the refrigeration system. These compact valves are spring closing with a lapped, stainless steel or chrome plated seat for positive closing action and low leakage. A minimum pressure difference of 0.05 bar (0.75 psi) is required to hold the valve in the open position. Removable seat plate with combination O-ring and metal to metal knife edge seal allows the valve to be disassembled for maintenance. They may be ordered with male adapter rings for close-coupling to other Refrigerating Specialties valves.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• UL Listed (Thru 3” Size)• May be installed in any position• Compact• Lightweight• Inline• Design Pressure (MRP): 34.5 bar (500 psi)Applications:• Re-circulating (overfeed) systems• High speed compressor discharge• Pump discharge• Suction temperatures down to -45°C (-50°F)• Hot gas lines (pan to evaporator)• Not suitable for discharge of reciprocating compressor or economizer port of screw compressor
$6,632.99$12,059.98 -
Parker Flocon A82-42 – Epr, 2-1/8 F.Sw Conn, 1-5/8 Port 102923 | Line Components
The A8 has a unique modular design that allows the commercial pressure regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be created, while pilot adaptors can be changed out to add features or even change functions. Thus, retrofitting for additional evaporator capacity, heat reclaim, or hold back for hot gas defrost is simple and requires no pipe line revisions under most circumstances. These valves will modulate to maintain a pressure as set for in the field, in spite of fluctuations in load, changes in ambient, changes in available refrigerant flow paths, and other operating variances. Appropriately sized, these valves will modulate the flow of liquid or vapor, high side or low side in a wide variety of system arrangements used in industrial, commercial and air conditioning installations. Models are available in combinations of connection sizes, port sizes, functions and features as designated by the model code, for application in a wide variety of control functions on industrial, commercial and air conditioning systems.Three control functions are available:Inlet, Outlet, and Differential pressure control. Two control features can be added by incorporating pilot solenoids; either Electric Shut-Off(S) or Electric Bypass (B); also called Wide-Opening.The valves are an integrated assembly of four modules:1) A body, which contains no moving parts, but is ordered to suit a particular connection size;2) A capacity cartridge, which contains both piston and modulating plug, and defines the Port Size;3) A pilot adapter, which defines the valve function and onto which the Pilot Solenoids providing either the “S” or “B” feature are added as required;4) The bonnet, containing the Range Spring and adjustment screw, which mechanisms are set for the value of pressure which the valve is to maintain
$6,588.99$11,979.98Parker Flocon A82-42 – Epr, 2-1/8 F.Sw Conn, 1-5/8 Port 102923 | Line Components
$6,588.99$11,979.98 -
Parker Flocon A82-42 – Epr, 1-5/8 F.Sw Conn, 1-5/8 Port 102920 | Line Components
The A8 has a unique modular design that allows the commercial pressure regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be created, while pilot adaptors can be changed out to add features or even change functions. Thus, retrofitting for additional evaporator capacity, heat reclaim, or hold back for hot gas defrost is simple and requires no pipe line revisions under most circumstances. These valves will modulate to maintain a pressure as set for in the field, in spite of fluctuations in load, changes in ambient, changes in available refrigerant flow paths, and other operating variances. Appropriately sized, these valves will modulate the flow of liquid or vapor, high side or low side in a wide variety of system arrangements used in industrial, commercial and air conditioning installations. Models are available in combinations of connection sizes, port sizes, functions and features as designated by the model code, for application in a wide variety of control functions on industrial, commercial and air conditioning systems.Three control functions are available:Inlet, Outlet, and Differential pressure control. Two control features can be added by incorporating pilot solenoids; either Electric Shut-Off(S) or Electric Bypass (B); also called Wide-Opening.The valves are an integrated assembly of four modules:1) A body, which contains no moving parts, but is ordered to suit a particular connection size;2) A capacity cartridge, which contains both piston and modulating plug, and defines the Port Size;3) A pilot adapter, which defines the valve function and onto which the Pilot Solenoids providing either the “S” or “B” feature are added as required;4) The bonnet, containing the Range Spring and adjustment screw, which mechanisms are set for the value of pressure which the valve is to maintain
$5,532.99$10,059.98Parker Flocon A82-42 – Epr, 1-5/8 F.Sw Conn, 1-5/8 Port 102920 | Line Components
$5,532.99$10,059.98 -
$4,597.99
$8,359.98Parker Rsf Strainers 3″ Less Gaskets And Flanges 100011 | Industrial Valves
$4,597.99$8,359.98 -
Parker Solenoid Valve S5A-32 1-1/4″ No Flanges Or Coil 100980 | Industrial Valves
Parker’s S5A is a low pressure drop gravity closing valve ideal for medium temperature suction applications. The low-pressure drop provided by the S5A ensures that losses are kept to a minimum, which is especially important in refrigeration suction lines. This heavy-duty solenoid valve is suitable for Ammonia and other refrigerants, certain oils and other fluids approved for use in refrigeration. The S5A is a pilot operated semi-steel bodied valve. The valve may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S5A Solenoid Valve is furnished with FPT: Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solders over copper tubing of given diameter) connections. The valve may be easily removed from between the flanges for servicing.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• Standard Coil Housing Meets NEMA 3R and NEMA 4 – Rain Tight• Coil Housing Surpasses NEMA Salt Spray Test• Plunger-Needle Assembly Same for S4A, S5A, S6N, S6A, S8F• Replaceable Piston Plug Assembly• Molded Class “F” Coil Construction• Pilot Light Available• Stainless Steel Needle• Manual Opening Stem• MOPD 20.7 bar (300 PSIG)• 27.6 bar (400 PSIG) maximum rated pressure (MRP)Application:• Refrigerant Liquid Lines• Suction Lines• NOT for Hot Gas Lines or other applications where high pressure drops will exist when valve is open.
$4,575.99$8,319.98 -
Parker Solenoid Valve S4A-32 1-1/4″ No Flanges Or Coil 100955 | Industrial Valves
Parker’s S4 solenoids are the refrigeration industry’s standard for solenoid valves and have provided decades of safe and reliable operation. These valves are highly configurable and can be provided with flanges for Socket Welding, Butt Welding, ODS connections, and Threaded connections. The S4 is offered in sizes from ¾” (DN20) to 8” (DN200). These valves may be opened by means of the manual opening stem for servicing or in case of electrical power failure. As the S4 valves up to 4” feature a flanged connection they may be easily removed from the system for servicing. The S4 valves are pilot operated and require a minimum 0.21 bar (3 psi) pressure drop to fully open. The S4AD is a spring closing, pilot operated, dual-position solenoid valve which is crucial for evaporator control groups that use hot gas defrost. The dual position function of the S4AD allows the system to equalize before fully opening and can prevent liquid hammer. The S4X is an explosion proof hazardous environment type solenoid carrying a NEMA Type 4 and 7 classification.
$4,256.99$7,739.98 -
Parker Flocon A81-35 – Epr, 1-5/8 F.Sw Conn, 1-3/8 Port 101722 | Line Components
The A8 has a unique modular design that allows the commercial pressure regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be created, while pilot adaptors can be changed out to add features or even change functions. Thus, retrofitting for additional evaporator capacity, heat reclaim, or hold back for hot gas defrost is simple and requires no pipe line revisions under most circumstances. These valves will modulate to maintain a pressure as set for in the field, in spite of fluctuations in load, changes in ambient, changes in available refrigerant flow paths, and other operating variances. Appropriately sized, these valves will modulate the flow of liquid or vapor, high side or low side in a wide variety of system arrangements used in industrial, commercial and air conditioning installations. Models are available in combinations of connection sizes, port sizes, functions and features as designated by the model code, for application in a wide variety of control functions on industrial, commercial and air conditioning systems.Three control functions are available:Inlet, Outlet, and Differential pressure control. Two control features can be added by incorporating pilot solenoids; either Electric Shut-Off(S) or Electric Bypass (B); also called Wide-Opening.The valves are an integrated assembly of four modules:1) A body, which contains no moving parts, but is ordered to suit a particular connection size;2) A capacity cartridge, which contains both piston and modulating plug, and defines the Port Size;3) A pilot adapter, which defines the valve function and onto which the Pilot Solenoids providing either the “S” or “B” feature are added as required;4) The bonnet, containing the Range Spring and adjustment screw, which mechanisms are set for the value of pressure which the valve is to maintain
$4,135.99$7,519.98 -
Parker Check Valve Ck4A-0 3″ Less Flanges And Gaskets 101053 | Industrial Valves
Parker’s CK4 check valves are designed to be close coupled to a control valve which will reduce overall installation length, complexity, and cost. These valves are designed to prevent backflow in a variety of refrigeration applications and can be mounted on a valve or as a standalone component. The CK4 can be mounted in any orientation when used as a standalone part of the refrigeration system. These compact valves are spring closing with a lapped, stainless steel or chrome plated seat for positive closing action and low leakage. A minimum pressure difference of 0.05 bar (0.75 psi) is required to hold the valve in the open position. Removable seat plate with combination O-ring and metal to metal knife edge seal allows the valve to be disassembled for maintenance. They may be ordered with male adapter rings for close-coupling to other Refrigerating Specialties valves.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• UL Listed (Thru 3” Size)• May be installed in any position• Compact• Lightweight• Inline• Design Pressure (MRP): 34.5 bar (500 psi)Applications:• Re-circulating (overfeed) systems• High speed compressor discharge• Pump discharge• Suction temperatures down to -45°C (-50°F)• Hot gas lines (pan to evaporator)• Not suitable for discharge of reciprocating compressor or economizer port of screw compressor
$4,025.99$7,319.98 -
Parker Strainers 2-1/2″ Rsf Strainer Less Gaskets And Flanges 100010 | Industrial Valves
The RSF and RSW industrial type Refrigerant Strainers with stainless steel screens are designed especially for the protection of Industrial Refrigeration control valves from foreign materials present in refrigeration systems. The fine stainless steel mesh will collect particles as small as 0.009” in diameter (60 Mesh@ 0.0075” wire). Generous available screen area allows maximum dirt capacity at minimum pressure drop. The RSF strainers may be close coupled to Industrial Refrigeration valves having the same flange gasket size.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• Stainless Steel Screen (60 Mesh)• Drain Connection for Safe Cleaning• Generous Screen Area• Low Pressure Drop• Durable Filter Bags Available ¾” to 4” (20-100mm)- on RSF Strainers• RSF Type Strainers can be close coupledApplication:• Refrigerant System• Oil System
$3,926.99$7,139.98 -
Parker Flocon A81-28 – Epr, 1-3/8 F.Sw Conn, 1-1/8 Port 101717 | Line Components
The A8 has a unique modular design that allows the commercial pressure regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be created, while pilot adaptors can be changed out to add features or even change functions. Thus, retrofitting for additional evaporator capacity, heat reclaim, or hold back for hot gas defrost is simple and requires no pipe line revisions under most circumstances. These valves will modulate to maintain a pressure as set for in the field, in spite of fluctuations in load, changes in ambient, changes in available refrigerant flow paths, and other operating variances. Appropriately sized, these valves will modulate the flow of liquid or vapor, high side or low side in a wide variety of system arrangements used in industrial, commercial and air conditioning installations. Models are available in combinations of connection sizes, port sizes, functions and features as designated by the model code, for application in a wide variety of control functions on industrial, commercial and air conditioning systems.Three control functions are available:Inlet, Outlet, and Differential pressure control. Two control features can be added by incorporating pilot solenoids; either Electric Shut-Off(S) or Electric Bypass (B); also called Wide-Opening.The valves are an integrated assembly of four modules:1) A body, which contains no moving parts, but is ordered to suit a particular connection size;2) A capacity cartridge, which contains both piston and modulating plug, and defines the Port Size;3) A pilot adapter, which defines the valve function and onto which the Pilot Solenoids providing either the “S” or “B” feature are added as required;4) The bonnet, containing the Range Spring and adjustment screw, which mechanisms are set for the value of pressure which the valve is to maintain
$3,904.99$7,099.98 -
Parker Safety Relief Valve Manifold 1-1/4 Inlet And Outlet 107564 | Industrial Valves
Product Type: M1 InlineInlet Size (inch): 1/2Inlet Connection Size: 1/2 inch, 13 mmFlow Coefficient: 7.2 Cv (Port 1), 8.2 Cv (Port 2), 8.3 Kv (Port 1), 9.5 Kv (Port 2)Materials of Construction: Carbon Steel (body), Stainless Steel (Stem)Maximum Operating Pressure: 27.6 barg, 400 psigMinimum Operating Temperature: -40 °C, -40 °FMaximum Operating Temperature: 150 °C, 300 °FMinimum Ambient Temperature: -29 °C, -20 °FInlet Size (mm): 13Maximum Ambient Temperature: 94 °C, 200 °FValve Type: M1 Inline
$2,881.99$5,239.98 -
Parker Solenoid Valve S7A-25 1″ No Flanges Or Coil 100994 | Industrial Valves
Parker’s S7 series solenoid valves are available in a low pressure drop version that are capable of opening with a pressure drop less than 1 psi across the valve. This feature makes them ideal for applications where low pressure drop is important, such as low pressure liquid feed lines. The S7 is a pilot operated, positive lift, cast iron bodied valve. The valve may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S7 Solenoid Valve is furnished with FPT Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solder over copper tubing of given diameter) connections.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• Standard Coil Housing Meets NEMA 3R and NEMA 4- Rain Tight• Coil Housing Surpasses NEMA Salt Spray Test• Molded Class “F” Coil Construction• Pilot Light Available• Stainless Steel Needle• Manual Opening Stem• Design Pressure (MRP): 27.6 bar (400 PSIG)• Positive Lift, Held Open ElectricallyApplication:• S7A – Most Liquid or Hot Gas Lines• S7AL- Low Pressure Drop, Liquid Transfer from Intermediate to Low Pressure Vessels, and Equalizer Lines
$2,738.99$4,979.98 -
Parker Solenoid Valve S4A-20 Less Flanges And Coil 100953 | Industrial Valves
Parker’s S4 solenoids are the refrigeration industry’s standard for solenoid valves and have provided decades of safe and reliable operation. These valves are highly configurable and can be provided with flanges for Socket Welding, Butt Welding, ODS connections, and Threaded connections. The S4 is offered in sizes from ¾” (DN20) to 8” (DN200). These valves may be opened by means of the manual opening stem for servicing or in case of electrical power failure. As the S4 valves up to 4” feature a flanged connection they may be easily removed from the system for servicing. The S4 valves are pilot operated and require a minimum 0.21 bar (3 psi) pressure drop to fully open. The S4AD is a spring closing, pilot operated, dual-position solenoid valve which is crucial for evaporator control groups that use hot gas defrost. The dual position function of the S4AD allows the system to equalize before fully opening and can prevent liquid hammer. The S4X is an explosion proof hazardous environment type solenoid carrying a NEMA Type 4 and 7 classification.
$2,342.99$4,259.98 -
Parker Safety Relief Valve Csrh3 350Psig 3/4X1 111650 | Industrial Valves
Parker’s cartridge safety relief valves(CSRV) are designed to offer thehighest level of protection whilemaintaining easy serviceability. TheCSRV was designed from the existingParker SR and SRH safety relief valvehousing, which allows for a simpleand easy upgrade path to the newcartridge based design.As local or state codes govern thefrequency of valve replacement, theCSRV is a cost effective alternative tostandard safety relief valve designs.Typical applications for the CSRVinclude compressor packages,accumulator vessels and anywhereelse protection from overpressure isrequired.
$2,188.99$3,979.98Parker Safety Relief Valve Csrh3 350Psig 3/4X1 111650 | Industrial Valves
$2,188.99$3,979.98 -
Parker Safety Relief Valve Csrh3 300Psig ¾ X 1 111649 | Industrial Valves
Parker’s cartridge safety relief valves(CSRV) are designed to offer thehighest level of protection whilemaintaining easy serviceability. TheCSRV was designed from the existingParker SR and SRH safety relief valvehousing, which allows for a simpleand easy upgrade path to the newcartridge based design.As local or state codes govern thefrequency of valve replacement, theCSRV is a cost effective alternative tostandard safety relief valve designs.Typical applications for the CSRVinclude compressor packages,accumulator vessels and anywhereelse protection from overpressure isrequired.
$2,188.99$3,979.98Parker Safety Relief Valve Csrh3 300Psig ¾ X 1 111649 | Industrial Valves
$2,188.99$3,979.98 -
Parker Safety Relief Valve Csrh3 200Psig 3/4X1 111647 | Industrial Valves
Parker’s cartridge safety relief valves(CSRV) are designed to offer thehighest level of protection whilemaintaining easy serviceability. TheCSRV was designed from the existingParker SR and SRH safety relief valvehousing, which allows for a simpleand easy upgrade path to the newcartridge based design.As local or state codes govern thefrequency of valve replacement, theCSRV is a cost effective alternative tostandard safety relief valve designs.Typical applications for the CSRVinclude compressor packages,accumulator vessels and anywhereelse protection from overpressure isrequired.
$2,188.99$3,979.98Parker Safety Relief Valve Csrh3 200Psig 3/4X1 111647 | Industrial Valves
$2,188.99$3,979.98 -
$2,188.99
$3,979.98Parker Safety Relief Valve Csrh3 250 Psig 3/4 X 1 111648 | Industrial Valves
$2,188.99$3,979.98 -
Parker Safety Relief Valve Csrh1 150 Psig 3/4 X 1 111646 | Industrial Valves
Parker’s cartridge safety relief valves(CSRV) are designed to offer thehighest level of protection whilemaintaining easy serviceability. TheCSRV was designed from the existingParker SR and SRH safety relief valvehousing, which allows for a simpleand easy upgrade path to the newcartridge based design.As local or state codes govern thefrequency of valve replacement, theCSRV is a cost effective alternative tostandard safety relief valve designs.Typical applications for the CSRVinclude compressor packages,accumulator vessels and anywhereelse protection from overpressure isrequired.
$2,188.99$3,979.98Parker Safety Relief Valve Csrh1 150 Psig 3/4 X 1 111646 | Industrial Valves
$2,188.99$3,979.98
