Henry Technologies
-
Henry Technologies Pressure Relief Valve 3/4″Fpt 250Psi Henry 5602-250-C | Industrial Valves
Factory set between 150 PSI to 450 PSI setting rangeXXX denotes setting in PSI to 0 decimal placeASME Section VII div 1 compliantHigh flow capacityNon-stick teflon valve seatTamper proof with sealing wireTest certs available on request
$1,242.99$2,259.98 -
Henry Technologies Pressure Relief Valve 1/2Fpt 300Psi Henry 5601-300-C | Industrial Valves
Factory set between 150 PSI to 450 PSI setting rangeXXX denotes setting in PSI to 0 decimal placeASME Section VII div 1 compliantHigh flow capacityNon-stick teflon valve seatTamper proof with sealing wireTest certs available on request
$1,242.99$2,259.98 -
Henry Technologies Pressure Relief Valve 1/2Fpt 250Psi Henry 5601-250-C | Industrial Valves
Factory set between 150 PSI to 450 PSI setting rangeXXX denotes setting in PSI to 0 decimal placeASME Section VII div 1 compliantHigh flow capacityNon-stick teflon valve seatTamper proof with sealing wireTest certs available on request
$1,242.99$2,259.98 -
Henry Technologies Pressure Relief Valve 1/2Fpt 150Psi Henry 5601-150-C | Industrial Valves
Factory set between 150 PSI to 450 PSI setting rangeXXX denotes setting in PSI to 0 decimal placeASME Section VII div 1 compliantHigh flow capacityNon-stick teflon valve seatTamper proof with sealing wireTest certs available on request
$1,242.99$2,259.98 -
Henry Technologies Henry 3/8″ Flare Oil Strainer SH9105 | Oil Management
Henry Oil Line Strainer 3/8 MSAEThe Henry Technologies SH-9105 oil strainer can be used in both Low andHigh Pressure Oil Management Systems. The strainer is suitable for HCFCand HFC refrigerants, along with their associated oils.Although the strainer is compatible with HFC/POE refrigerant/oil combinations,Henry Technologies recommends the use of an oil filter or oil filter-drier. Thisis due to the scavenging nature of POE oil.Greater system protection will be achieved using an oil filter or oil filter driersover a traditional oil strainers.Typically, an oil strainer is fitted immediately upstream of a mechanical oillevel regulator in order to protect the float needle valve from debris. This inturn protects the compressor from damage.
$153.99$279.98 -
Henry Technologies 7/8 X 90 Lr Copper Elbow SE14-410A | Copper Tube, Fittings And Installation
7/8 x 90 LR COPPER ELBOW
$21.99$39.98 -
Henry Technologies 3/4 X 90 Lr Copper Elbow SE12-410A | Copper Tube, Fittings And Installation
3/4″ x 90 Deg Copper Elbow
$10.99$19.98 -
Henry Technologies 3.1/8 X 90 Copper Elbow SE50 | Copper Tube, Fittings And Installation
3.1/8 X 90 COPPER ELBOW
$274.99$499.98
