No products in the cart.
Recommended Items
-
$298.99
$727.97Realcold Copper Tube SD – (1/2″) 12.50 x 0.81mm 15mtrs
$298.99$727.97 -
$131.99
$239.98Danfoss Akva 10-4, Orifice 10-4 068F0529 | Line Components
$131.99$239.98 -
$80.49
$195.97Henry Technologies COUPLING 2 5/8X2 1/8 43BAR
$80.49$195.97 -
$126.49
$307.97Henry Technologies ELBOW 45 DEG 15/8 R410A 56BAR
$126.49$307.97
Best Seller Items
-
$126.49
$307.97Green Earth Solutions EVAP COIL CLEANER 5L GREENLEAF
$126.49$307.97 -
$137.99
$335.97Realcold K-Flex Insulation 32mm wall X 42mm I.D X 2m
$137.99$335.97 -
$80.49
$195.97Realcold Nylog Blue Gasket Sealant 30mL
$80.49$195.97 -
$103.49
$251.97Green Earth Solutions COIL & DUCT DISINFECTANT 5L
$103.49$251.97 -
$11.49
$27.97Henry Technologies 3/8 FLARE NUT x 3/8 ID
$11.49$27.97
-
$3,409.99
$6,199.98Danfoss Mci-25 Mjukstart 11Kw 25A 037N0040 037N0040 | Variable Speed Drives
$3,409.99$6,199.98 -
Danfoss Lcp Mounting Kit W/No Lcp 130B1117 | Variable Speed Drives
The kit includes fasteners, 3m cable and gasket – There is no LCP included.
$175.99$319.98 -
$9,866.99
$17,939.98Danfoss – Cd302-P18 – 18.5 Kw Ip55 Drive 131B3588 | Variable Speed Drives
$9,866.99$17,939.98 -
Danfoss – Cd302-P15 – 15.0 Kw Ip55 Drive 131B3580 | Variable Speed Drives
CD302 15.0kW; without coating; IP55; with LCP; H1; B1
$6,181.99$11,239.98Danfoss – Cd302-P15 – 15.0 Kw Ip55 Drive 131B3580 | Variable Speed Drives
$6,181.99$11,239.98 -
$5,917.99
$10,759.98Danfoss – Cd302-P11 – 11.0 Kw Ip55 Drive 131B3572 | Variable Speed Drives
$5,917.99$10,759.98 -
Danfoss Cd302 Danfoss 11 Kw 131B3568 | Variable Speed Drives
CD302 11.0kW; without coating; IP21; with LCP; H1; B1
$5,521.99$10,039.98Danfoss Cd302 Danfoss 11 Kw 131B3568 | Variable Speed Drives
$5,521.99$10,039.98 -
Hamer Heat Trace – 240W X 6 Mtr CSC2-6.0 | Defrost Heater Tape
CSC2 Drainline heaters for cold store drain pipes.Switched on only during defrosting cycle.The cables must never be cut to shorten the 1m long cold tail.Totally waterproof.Double insulation.Moulded terminations.Extremely flexible.Silicone insulation.Voltage 230V as standard.Permissible surface temperature -70°C to +200°C.Not suitable for PVC pipes.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$329.99$599.98 -
Hamer Heat Trace – 80 Watts X 2.0 Mtr Integrated T.Stat CSC2K-2.0 | Defrost Heater Tape
CSC2K heaters are designed to be placed at the bottom of collector trays inside refrigeration equipment in cold rooms, to prevent freezing and to allow condensate water to flow freely.The integrated thermostat makes them fully autonomous.The cables must never be cut to shorten the 1m long cold tail.The round part of the thermostat must be placed in the best position to collect information.Fully sealed.Double insulation.Extremely flexible.Voltage 230V as standard.Permissible surface temperature -40°C to +110°C.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$175.99$319.98 -
Hamer Heat Trace – 80 Watts X 2.0 Mtr CSC2-2.0 | Defrost Heater Tape
CSC2 Drainline heaters for cold store drain pipes.Switched on only during defrosting cycle.The cables must never be cut to shorten the 1m long cold tail.Totally waterproof.Double insulation.Moulded terminations.Extremely flexible.Silicone insulation.Voltage 230V as standard.Permissible surface temperature -70°C to +200°C.Not suitable for PVC pipes.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$131.99$239.98 -
Hamer Heat Trace – 40 Watts X 1.0 Mtr Integrated T.Stat CSC2K-1.0 | Defrost Heater Tape
CSC2K heaters are designed to be placed at the bottom of collector trays inside refrigeration equipment in cold rooms, to prevent freezing and to allow condensate water to flow freely.The integrated thermostat makes them fully autonomous.The cables must never be cut to shorten the 1m long cold tail.The round part of the thermostat must be placed in the best position to collect information.Fully sealed.Double insulation.Extremely flexible.Voltage 230V as standard.Permissible surface temperature -40°C to +110°C.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$153.99$279.98 -
Hamer Heat Trace – 40 Watts X 1.0 Mtr CSC2-1.0 | Defrost Heater Tape
CSC2 Drainline heaters for cold store drain pipes.Switched on only during defrosting cycle.The cables must never be cut to shorten the 1m long cold tail.Totally waterproof.Double insulation.Moulded terminations.Extremely flexible.Silicone insulation.Voltage 230V as standard.Permissible surface temperature -70°C to +200°C.Not suitable for PVC pipes.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$109.99$199.98 -
Hamer Heat Trace – 160 Watts X 4.0 Mtr CSC2-4.0 | Defrost Heater Tape
CSC2 Drainline heaters for cold store drain pipes.Switched on only during defrosting cycle.The cables must never be cut to shorten the 1m long cold tail.Totally waterproof.Double insulation.Moulded terminations.Extremely flexible.Silicone insulation.Voltage 230V as standard.Permissible surface temperature -70°C to +200°C.Not suitable for PVC pipes.NOTE – Heat trace cable must be installed in accordance with current AS/NZS Standards.Please refer to manufacturers instructions before installing Flexelec product.
$186.99$339.98
