Rinnai RHFE1253N – Evolve 1253 Plus NG NZ

$5,899.99

🏆 Best Price Guaranteed*

In stock

Genuine Rinnai RHFE1253N – Evolve 1253 Plus NG NZ (Evolve 1253 Plus). Brand new, NZ-wide delivery from NZ Depot.

Discount per Quantity

Quantity 12 - 45 - 910 +
Discount 0%5%8%10%
Price $5,899.99$5,604.99$5,427.99$5,309.99
Purchase & earn 5,900 points!

Rinnai RHFE1253N – Evolve 1253 Plus NG NZ: Genuine Rinnai Trade Supply

You are viewing the Rinnai RHFE1253N – Evolve 1253 Plus NG NZ (SKU: RHFE1253N). This is a 100 percent genuine Rinnai Evolve 1253 Plus Fires & Fireplaces component, engineered for New Zealand homes and commercial sites. Refrigerant: . Cooling capacity: kW. Heating capacity: kW.

Product Details: Rinnai RHFE1253N

Rinnai RHFE1253N

Rinnai RHFE1253N – Evolve 1253 Plus NG NZ, part of the Evolve 1253 Plus range. With the Rinnai power flue system, the stunning Evolve 1253 fire can be installed where other fires cannot go. Genuine Rinnai New Zealand product, brand new, supplied through Rinnai NZ’s trade channel.

Key Features

  • ✓ Type:Power flue
  • ✓ Dimensions:Inner 50 mm, outer 70-80 mm
  • ✓ Max. flue length:8.5 m*
  • ✓ Max. number of bends:Three

Rinnai RHFE1253N — Specifications

Product Overview
Product Evolve 1253 Plus NG NZ
Rinnai Part Number RHFE1253N
Product Range Evolve 1253 Plus
Category Home Heating > Fires & Fireplaces > Engines
Brand Rinnai
Technical Specifications
Codes Evolve 1253 NG: RHFE1253N; Evolve 1253 LPG: RHFE1253L
Gas type Available for Natural Gas or LPG, specify at the time of purchase
Convection fan 3-speed fan. Heat is distributed from the top of the appliance.
Gas connection ½ ” BSP, the gas supply terminate inside the fire—lower left hand side of the appliance
Data plate Located inside the appliance, upper right hand side
Flue Appliance MUST be installed with a Rinnai flue system.; Type:; Power flue; Dimensions:; Inner 50 mm, outer 70-80 mm; Max. flue length:; 8.5 m*; Max. number of bends:; Three; * For systems requiring a flue length greater than 8.5 m, an extended flue system with an increased diameter is available. When used with a LFADAPT long flue adapater, the flue length can extend to 20 m. Refer ‘Evolve-Linear extended flue option’ in the Downloads tab.
Power consumption and electrical supply High 90 W, standby <8 W. This appliance has a 1.5 m power cord with a 3-pin plug supplied. The power cord passes through a slot in the back left hand corner of the unit.
Safety devices Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector
Temperature control Operated using a basic infra-red remote, or for more features, such as timers and thermostatic control, using the Rinnai Wi-Fi fireplace controller app.
Weight Approx. net weight: 83 kg
General clearances The minimum clearances listed below are measured from the edge of the glass; Above 400 mm; Sides – 400 mm (includes side walls); In front – 1000 mm
Dimensions These are unit dimensions only, not the framing/cavity dimensions.
Compliance Supplier declaration of compliance: Declaration number – 00000235273T7
Market release October 2023
MasterSpec Link View Work Sections

Documents & Downloads

✔ Full Rinnai NZ Manufacturer Warranty — genuine Rinnai New Zealand product. Warranty & after-sales support.

Every Rinnai product sold by NZ Depot is brand new and dispatched NZ-wide. Order online today or contact NZ Depot for trade pricing and availability.

Need advice or trade pricing? Contact NZ Depot or browse more hot water, heating and HVAC deals at NZ Depot.

Pro Tip: Ensure this RHFE1253N matches your installation. Sourced directly from the Rinnai NZ supply chain for full compatibility and manufacturer warranty.

The NZ Depot Trade Supply Advantage

🏭

No Showroom Markup

Direct trade pricing on every Rinnai unit. You pay for the product, not the overheads.

🚚

Nationwide Dispatch

From Cape Reinga to Bluff. Routed from the nearest distribution hub for fastest delivery.

🛡️

Genuine Rinnai Warranty

Full manufacturer warranty. View warranty card.

Trade and Installation FAQ

Is the Rinnai RHFE1253N – Evolve 1253 Plus NG NZ suitable for New Zealand conditions?

Yes. The RHFE1253N is engineered for the climate ranges experienced across New Zealand and is sold and supported by Rinnai NZ.

Does this unit require professional installation?

Yes. To preserve your manufacturer warranty, all refrigerant-based Rinnai equipment must be installed by a licensed New Zealand HVAC technician.

What refrigerant does the RHFE1253N use?

This unit uses refrigerant, which is the modern, low-GWP standard for residential and light commercial heat pumps in New Zealand.

Looking for the best price on the Rinnai RHFE1253N? NZ Depot supplies the Rinnai RHFE1253N New Zealand wide with fast dispatch, trade pricing and genuine Rinnai warranty support. Compare the Rinnai RHFE1253N – Evolve 1253 Plus NG NZ with the rest of the Rinnai Evolve 1253 Plus range, check the full specifications above, and order the Rinnai RHFE1253N online today or request a trade quote for volume supply.


Browse the full range of Home Heating available for NZ-wide trade and retail supply.

© 2026 NZ Depot Limited. All Rights Reserved. | 100% NZ Owned and Operated. | Authorised Rinnai Trade Supplier.

Additional information

Weight 20 kg
Dimensions 257 × 760 × 582 mm
MPN

Brand

Copper Pipe (mm)

Series

Unit Type

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Main Menu