No products in the cart.
-
$1,825.99
$3,319.98Danfoss Strainer Housing, Fia 100 148B6009 | Industrial Valves
$1,825.99$3,319.98 -
$1,616.99
$2,939.98Danfoss Strainer Housing, Fia 100 148B6008 | Industrial Valves
$1,616.99$2,939.98 -
$1,869.99
$3,399.98Danfoss Spare Part, Icff 25-40E, Filter Module 027L2299 | Industrial Valves
$1,869.99$3,399.98 -
$1,616.99
$2,939.98Danfoss Spare Part, Icff 20E, Filter Module 027L2256 | Industrial Valves
$1,616.99$2,939.98 -
$1,077.99
$1,959.98Danfoss Spare Part, Cve, Repair Kit 027B0995 | Industrial Valves
$1,077.99$1,959.98 -
$1,132.99
$2,059.98Danfoss Spare Part For Vdh/T Common 180L5002 | Industrial Valves
$1,132.99$2,059.98 -
$2,793.99
$5,079.98Danfoss Solenoid Valve, Evrb 032F6361 | Industrial Valves
$2,793.99$5,079.98 -
Parker Solenoid Valve S8F-13 1/2″ No Flanges Or Coil 100997 | Industrial Valves
Parker’s S4 solenoids are the refrigeration industry’s standard for solenoid valves and have provided decades of safe and reliable operation. These valves are highly configurable and can be provided with flanges for Socket Welding, Butt Welding, ODS connections, and Threaded connections. The S4 is offered in sizes from ¾” (DN20) to 8” (DN200). These valves may be opened by means of the manual opening stem for servicing or in case of electrical power failure. As the S4 valves up to 4” feature a flanged connection they may be easily removed from the system for servicing. The S4 valves are pilot operated and require a minimum 0.21 bar (3 psi) pressure drop to fully open. The S4AD is a spring closing, pilot operated, dual-position solenoid valve which is crucial for evaporator control groups that use hot gas defrost. The dual position function of the S4AD allows the system to equalize before fully opening and can prevent liquid hammer. The S4X is an explosion proof hazardous environment type solenoid carrying a NEMA Type 4 and 7 classification.
$1,242.99$2,259.98 -
Parker Solenoid Valve S7A-25 1″ No Flanges Or Coil 100994 | Industrial Valves
Parker’s S7 series solenoid valves are available in a low pressure drop version that are capable of opening with a pressure drop less than 1 psi across the valve. This feature makes them ideal for applications where low pressure drop is important, such as low pressure liquid feed lines. The S7 is a pilot operated, positive lift, cast iron bodied valve. The valve may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S7 Solenoid Valve is furnished with FPT Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solder over copper tubing of given diameter) connections.Markets:• Industrial Refrigeration• Commercial RefrigerationFeatures and Benefits:• Standard Coil Housing Meets NEMA 3R and NEMA 4- Rain Tight• Coil Housing Surpasses NEMA Salt Spray Test• Molded Class “F” Coil Construction• Pilot Light Available• Stainless Steel Needle• Manual Opening Stem• Design Pressure (MRP): 27.6 bar (400 PSIG)• Positive Lift, Held Open ElectricallyApplication:• S7A – Most Liquid or Hot Gas Lines• S7AL- Low Pressure Drop, Liquid Transfer from Intermediate to Low Pressure Vessels, and Equalizer Lines
$2,738.99$4,979.98
