No products in the cart.
2 In
-
Viper Heat Blocking Gel RT410S | Brazing Tools And Rods
Viper Heat Blocking Gel is a thermal adsorption compound that will prevent heat damage to components during low temperature soldering or brazing. Use as a fire retardant around walls and surrounding areas when using an open flame.Used Where:Low Temperature Soldering or Brazing: Coat piping with a long and thick layer of gel to protect heatsensitive components from damage. For high temperature brazing or soldering we recommend using ourViper Heat Blocking Putty (Part # RT400P).Fire Protection: Spray coat all surrounding areas to prevent fire or damage to materials from heat oropen flame.Please review all directions below and on the label.Directions:1. Shake bottle well. Spray a thick layer of Viper Heat Blocking Gel onto components and allsurrounding areas that may come in contact with direct flame or heat transfer.2. Solder or weld. Use a low flame and flow nitrogen for added protection.3. Allow surfaces to cool or spray additional Viper Heat Blocking Gel on a heated surface to cool itfaster.
$131.99$239.98Viper Heat Blocking Gel RT410S | Brazing Tools And Rods
$131.99$239.98 -
CPS Nitrogen Regulator Psi/Kpa 20-600 BRRN2A | Brazing Tools And Rods
PRO-SET Nitrogen RegulatorUL ListedDelivery Pressure 0-400 PSIEasy-to-read gauges with protective rubber gauge boots
$769.99$1,399.98 -
CPS Nitrogen Flow Meter NFM3 | Brazing Tools And Rods
Nitrogen Flow Meter
$351.99$639.98CPS Nitrogen Flow Meter NFM3 | Brazing Tools And Rods
$351.99$639.98 -
$65.99
$119.98Bromic Mapp Gas Mg9 MG9 | Brazing Tools And Rods
$65.99$119.98 -
Cps Por Set Brazing Hand Torch BRHT1 | Brazing Tools And Rods
PRO-SET HAND TORCHAuto-ignite torchAdjustable flame controlFor use with propylene (MAPPRO), MAPP and PropaneCGA600 Inlet ConnectionCast aluminum and stainless steel burn tube constructionFlame lock button, precise flame adjustmentClamshell packaging
$307.99$559.98 -
Cps – Leak Stop For A/C & Refrigeration Systems OPV2013C1 | Brazing Tools And Rods
CPS – Leak Stop for A/C & Refrigeration systems
$164.99$299.98 -
NU-CALGON Cool Gel 946Ml Spray Pack N0782 | Specials
For Use On:• Lead free valves and fittings• New construction and piping installation• Shower valves installation and repair• Trim work and cabinetry• Drywall and studs• Commercial rooftop repair• Furnace repair and installation• Refrigeration repair and installation• Medical gas systems• Valve installation and repair• Welding Cool Gel® can be used to protect lead free valves during the soldering process and with any other soldering or brazing job to protect components and materials from costly heat damage. Cool Gel’s unique, no-drip gelled formula evaporates within 48 hours, eliminating cleanup. Using Cool Gel is easier than using a heat blanket, and provides assurance the job can be completed without costly heat damage. • Protects lead free valves during soldering• Reduces the threat of costly heat damage to rubber seals and gaskets• Protects components and materials during soldering to avoid heat damage• Protects painted and finished surfaces from discoloration due to torch heat• Unique gelled formula sticks to surfaces without dripping or running off• Clear, non-staining gel leaves no residue, eliminating cleanup• Safe, non-toxic, harmless to skin, and odorless• Made in U.S.A.
$54.99$99.98NU-CALGON Cool Gel 946Ml Spray Pack N0782 | Specials
$54.99$99.98 -
Bromic Brazing Hand Torch With Ignitor Benzomatic TS8000BT | Brazing Tools And Rods
The Bernzomatic® DuraCast® 8000 Torch is built with instant on/off ignition, an adjustable ultra-swirl flame and flame lock option for continuous use. It is designed for use at any angle and is pressure-regulated to reduce the risk of pulsating or yellow flames when inverted, making it ideal for large diameter soldering, light brazing, woodworking and cooking. The DuraCast® 8000 Torch is compatible with Bernzomatic MAP-Pro® fuel and Bernzomatic Propane fuel, sold separately.
$296.99$539.98 -
Johnson Matthey Brazing Alloy Easy-Flo 34% 1.5Mm X 750Mm EF3416 | Brazing Tools And Rods
BRAZING ALLOY Easy-Flo 34% 1.5mm x 750mm
$43.99$79.98 -
Johnson Matthey Brazing Alloy 15% 2.4Mm X 750Mm Stick (Each) P15 | Brazing Tools And Rods
BRAZING ALLOY 15% 2.4mm x 750mm Stick (Each)
$54.99$99.98 -
Johnson Matthey Brazing Alloy 15% 2.4Mm X 750Mm (1Kg Pack) P15-1KG | Brazing Tools And Rods
BRAZING ALLOY 15% 2.4mm x 750mm (1Kg Pack)
$1,715.99$3,119.98 -
Johnson Matthey Brazing Alloy 15% 1.5Mm X 750Mm (1Kg) P15-1KG-1.5 | Brazing Tools And Rods
BRAZING ALLOY 15% 1.5mm x 750mm (1Kg)
$1,715.99$3,119.98 -
$571.99
$1,039.98Value Refrigerant Leak Detector-R32/R404A VML-1 | Leak Detectors
$571.99$1,039.98 -
Value – Tip Cover For Vml-1 Leak Detector 352060031 | Leak Detectors
Value – Tip cover for VML-1 Leak Detector
$10.99$19.98 -
Value Sensor For Vml-1 Leak Detector VML-SENSOR | Leak Detectors
Sensor for VML-1 Leak Detector
$197.99$359.98 -
CPS Leak Seeker W-Emos Sensor LS1 | Leak Detectors
Revolutionary E_MOS® Technology developed by CPS is more sensitive, stable and accurate than any other detection method on the market.*U.S. Patent # 8,555,701Features:Progressive Alarm ModeAlarm pitch and number of lighted LEDs progressively increase as the leak source is approached. Allows searching for a broad range of leak sizes.Threshold Alarm ModeProvides a quick go, no/go verifying a leak has been found and approximate size.One button controls On/Off and all functionsMicroprocessor controlled sensor improves sensitivity and reduces false alarmsPatented EMOS detection technology increases battery and sensor lifeReplaceable EMOS2 sensor, sensor filter and sensor tipMetal sensor housing with patented water vapor stabilizing filter eliminates false alarms due to condensateOptimal leak-finding performance under a broad range of conditionsSimple, intuitive bar graph LED displaySoftware managed sensor rejuvenation at startup ensures highest sensitivityMeets or exceeds all US and international standards for automotive and commercial useErgonomic, high-impact housing with high output alarm speakerLow battery indicationDesigned and manufactured in U.S.A. with U.S. and globally sourced components
$1,176.99$2,139.98CPS Leak Seeker W-Emos Sensor LS1 | Leak Detectors
$1,176.99$2,139.98 -
Inficon D-Tek-3 Co2 Leak Detector 721-204-G1 | Leak Detectors
D-TEK 3 builds on the proven performance of D-TEK leak detectors with added features to help you get your job done faster. An easy-to-change sensor, quick charge lithium ion battery, and a new ergonomic design make D-TEK 3 a versatile tool for everyday RAC maintenance and repair. Plus, a new optional CO2 sensor gives you two instruments in one. Upgrade your toolbox with this accurate and reliable leak detector.
$3,706.99$6,739.98Inficon D-Tek-3 Co2 Leak Detector 721-204-G1 | Leak Detectors
$3,706.99$6,739.98
