EPEVER XTRA1206N MPPT Solar is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

XTRA N series controller which can carry different display units(XDB1/XDS1/XDS2) adopt the advanced MPPT control algorithm, it can minimize the maximum power p0int loss rate and loss time, quickly track the maximum power p0int(MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.

CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3) – 100% charging and discharging in working environment temperature range – Optional LCD display units (XDB1/XDS1/XDS2) – High quality and low failure rate components of ST or IR to ensure service life – Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5% – Maximum DC/DC transfer efficiency is as high as 98.3%, full load efficiency is up to 97.3% – Advanced MPPT control algorithm to minimize the MPP lost rate and lost time – Accurate recognizing and tracking of multi-peaks maximum power p0oint – Wide MPP operating voltage range – Support the lead-acid and lithium batteries, programmable temperature compensation – Limit charging power & current overrated value – Real-time energy statistics function – Power reduction automatically over-temperature value – Multiple load work modes – Comprehensive electronic protection – Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol – Support monitoring and setting the parameters via APP or PC software

Model: XTRA1206N Rated charge current: 10A Rated charge power: 130W/12V 260W/24V Normal system voltage: 12/24VDC Auto Work Max. conversion efficiency: ≤98.60% MPPT tracking efficiency: ≥99.50% Dimensions(L*W*H)mm: 175*143*48 Gross weight: 0.57KG

Key Features

• ✓ This model is XDS2 version!

Order the EPEVER XTRA1206N MPPT Solar Charge Controller 10A 12V/24V online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER Tracer 10420AN 100A is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

Tracer-AN Series is the largest charge controller series in EPEVER’s product range and can take up to 5KW solar panels. For even more power, the user can use PAL-ADP-5ON to connect max. 6 units of a controller in parallel for up to 30kW system. The multiple dry contact signals are designed for a diversified application.

Features MPPT tracking efficiency above 99.5% Maximum charge conversion efficiency as high as 98% Support lead-acid and LiFePO4 batteries Common negative grounding, Charging current up to 100A Charging power and current limitation function High-temperature charging power derating function 3 relays design for different demand: utility, generator and load Support up to 6 units in parallel Remote temperature and voltage sensor design Isolated Rs-485 with 5VDC/200mA and MODBUS protocol

Model: Tracer10420AN Nominal system voltage: 12/24/36/48VDC/Auto Battery type: Lead-acid/Lithium/User Battery input voltage range: 8V – 68V Rated charge current: 100A Rated charge power: 1250W/12V 2500W/24V 3750W/36V 5000W/48V Max. conversion efficiency: 98.50% Tracking efficiency: >=99.5% Max. PV open circuit voltage: 200V MPP voltage range: (Battery Voltage+2V) – 144V Enclosure: IP20 Communication interface: RS485 Dimensions(LxWxH)(mm): 394x242x143 Net weight: 7.4kg

Order the EPEVER Tracer 10420AN 100A MPPT Solar Charge Controller 12V/24V/36V/48V online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER Tracer 8415AN 80A is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.

Features: 12V/24V/36V/48VDC Auto High quality & low failure rate components of ST and Infineon to ensure the product’s life The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP Auto control system to limit the charging power & current go over the rated value Battery temperature compensation function, Real-time energy recording and statistical function, Automatic over-temperature power reduction function Load relay control external load switch signal to realize diversified load work modes All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time.

MODEL: TRACER 8415AN 12VDC / 24VDC /36VDC/48VDC Auto select Rated Battery Current 80A Max. Solar Input Voltage 150VDC Max. PV input power:12V/ 1000W , 24V /2000W, 36V/3000W, 48V/4000W Dimension 394x 240 x 134 / mm Weight 6.1kg

Order the EPEVER Tracer 8415AN 80A MPPT Solar Charge Controller 12V/24V/36V/48V online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER IT10420NC G3 100A is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

The EPEVER IT10420NC G3 is a high-current MPPT solar charge and discharge controller with 100A rated charge/discharge current, dual PV input and load output.

It supports lead-acid and lithium batteries, CAN parallel communication, BMS communication and RS485 communication. Up to 6 controllers can be connected in parallel.

Key Features

• ✓ MPPT tracking efficiency up to 99.9%
• ✓ Maximum conversion efficiency 98.5%
• ✓ 100A rated charge/discharge current
• ✓ Supports dual PV inputs
• ✓ Supports lead-acid and lithium batteries
• ✓ CAN parallel communication, up to 6 units
• ✓ BMS communication
• ✓ RS485 communication
• ✓ Optional Bluetooth, WiFi or 4G module
• ✓ IP32 controller only
• ✓ 1300W @ 12V
• ✓ 2600W @ 24V
• ✓ 5200W @ 48V

EPEVER IT10420NC G3 100A: Full Specifications

Order the EPEVER IT10420NC G3 100A MPPT Solar Charge Controller 12V/24V/48V Auto online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER New 20A Dual is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

DuoRacer Series MPPT Dual Battery Solar Charge Controller 20A is designed for charging two batteries at the same time in a solar system. This controller supports multiple life battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and small applications. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm by Epsolar, which will minimize the maximum power point loss rate and loss time and fast-track the maximum power point(MPP) of the PV array to obtain the maximum energy from the solar array under any conditions.

Features: Maximum Power Point Tracking technology with ultra-fast tracking speed and tracking efficiency at no less than 99.5% guaranteed Advanced MPPT control algorithm to minimize the MPPlost rate and lost time A wider range of the MPP operation voltage to improve the PV module utilization Auto control function of charging power & charging current limitation(BATT1) High quality and low failure rate components of ST, TI and Infineon to ensure the product life Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life BATT1 type can be set via LED/LCD The DuoRacer switches into the low-power mode when there is no manual operation for a long time and charging conditions are not satisfied (PV

Order the EPEVER New 20A Dual Battery MPPT Solar Controller DR2210N online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER TRACER 1206AN MPPT is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

The Tracer-AN Solar Charge Controller boasts high-efficiency multiphase synchronous rectification technology (MSRT) and a sophisticated MPPT control algorithm. Its dual-core processor architecture and common negative design ensure rapid response, reliability, and adherence to high industrial standards.

Key Features

• ✓ High Conversion Efficiency: MSRT ensures optimal conversion efficiency at any charge power, enhancing your solar system’s energy efficiency. Advanced MPPT Algorithm: Minimizes power point loss rate and loss time, ensuring rapid tracking of the PV array’s maximum power point (MPP) for maximized energy capture. Stability & Safety: Charging power and current limitation functions, along with automatic power reduction, ensure stable operation with oversized PV modules and in high-temperature environments. Ultra-fast Tracking: With a tracking efficiency of up to 99.5%, the advanced MPPT technology and rapid tracking speed allow the device to promptly adjust to optimal energy capture settings. Charging Options: Supports four charging options-Sealed, Gel, Flooded, and User. Load Control: Load relay control facilitates various load work modes. Relay Design: Features auto-control for utility and generator relays. Remote Sensing: Remote temperature and voltage sensors provide accurate battery data. Communication: Isolated RS-485 interface (with 5VDC/200Ma protected output and MODBUS protocol) allows for device connectivity without power loss. Monitoring: Easily monitor and adjust parameters via mobile app or PC software.
• ✓ System Nominal Voltage: 12/24V DC Auto Rated Charge Current: 10A Rated Discharge Current: 10A Max PV Open Circuit Voltage: 60V, 46V MPPT Voltage Range: (Battery Voltage +2V)~36V Max PV Input Power: 130W (12V), 260W (24V) Self-consumption: ≤12mA Discharge Circuit Voltage Drop: ≤0.23V Grounding: Common Negative RS485 Interface: 5V DC/100mA Dimensions: 172 x 139 x 44 mm Weight: 570g

Order the EPEVER TRACER 1206AN MPPT Solar Charge Controller – 10A online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER TRACER 3210AN MPPT is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

Tracer series AN controller adopts MPPT technology (Maximum Power Point Tracking). The advanced tracking algorithm make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increase charge efficiency up to 25% and decrease the power of solar array needed. Tracer has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank.

New A-series Tracer has all the features of earlier Tracer models, and has a built in display. Fully USER definable settings using optional MT-50 ($49) or PC cable ($15) suitable for a wide range of battery types, and load timer, day/night, or disconnect settings – this makes it compatible with most LITHIUM BATTERIES. The MT-50 display is not required for selecting any of the three standard battery settings. 3 Stage charging: Bulk, Boost and Float, plus Equalize function. Settings for Flooded, Gel, Sealed batteries or user defined settings, contain algorithms to suit all lead acid battery types. Temperature Probe $25；eBOX WIFI $35

Suitable for use on 12 and 24 VDC systems MPPT Technology is around 98% efficient, which is much better than the old PWM type charging that is around 75% efficient MPPT technology takes the difference in voltage between your batteries and your solar panels and converts it into CHARGING AMPS for up to 45% + more output from your panels! Can take any Solar Input that is higher than your Battery Voltage and charge your batteries! Example: You can have a 24VDC solar panel and a 12VDC battery system, and the MPPT controller will turn the extra voltage into Amps!

MODEL: TRACER 3210AN 12VDC / 24VDC Auto Rated Battery Current 30A Max. Solar Input Voltage 100VDC Max. PV input power:12V/ 390W , 24V /780W Dimension 228x 164 x 55 / mm Weight 1.2kg

Key Features

• ✓ Peak conversion efficiency of 97 % High Tracking efficiency of 99%

Order the EPEVER TRACER 3210AN MPPT Solar Charge Controller 30A online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

EPEVER 40A MPPT Charge is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by EPEVER, a proven name in solar technology, and supplied with genuine NZ warranty support.

Introducing the EPEVER XTRA4415N-XDS2 40A MPPT Solar Charge Controller, a high-performance device designed for 12/24/36/48V systems, capable of handling up to 150V.

Key Features

• ✓ Utilizes advanced MPPT technology with up to 99.5% tracking efficiency. Achieves DC/DC transfer efficiency up to 98%, with full load efficiency at 97.4%. Offers a broad MPP operating voltage range. Features low temperature protection and a lithium battery charging self-activation function. Includes power and current limitation beyond rated specifications. Equipped with real-time energy monitoring. Supports multiple load operation modes. Provides comprehensive electronic protection for safety. Compatible with both lead acid and LiFePO4 batteries. Over temperature protection with power reduction in high heat. Optional LCD display units (XDB1/XDS1/XDS2) for enhanced usability. Built with high-quality, durable components from ST or IR. Isolated RS485 with protected 5V/200mA output, using standard Modbus protocol. Remote monitoring and settings adjustment via APP or PC software. Dust and waterproof with an IP32 rating. CE certified (LVD IEC62109, EMC EN3/1-6-61000).
• ✓ Nominal voltage: Auto 12/24/36/48VDC Charge/discharge current: 40A Battery voltage range: 8-68V Max PV open circuit voltage: 150V Max PV input power: 520W (12V), 1040W (24V), 1560W (36V), 2080W (48V) Conversion efficiency: 98.5%; Load efficiency: 97.2% Dimensions: 255x189x83.2mm; Weight: 2.47kg

Order the EPEVER 40A MPPT Charge Controller XTRA4415N 150V – 12/24/36/48V Compatible online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

SRNE Shiner2440 40A MPPT is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by SRNE, a proven name in solar technology, and supplied with genuine NZ warranty support.

The Shiner Series MPPT Solar Charge Controller is designed for off-grid solar applications, offering high efficiency, advanced protection, and user-friendly operation.

Key Features

• ✓ High MPPT Efficiency – Up to 99.9% tracking efficiency for optimal solar power utilization. Broad Compatibility – Supports 12V and 24V battery systems, including lead-acid and lithium batteries. Smart Connectivity – RS485 and CAN communication, Bluetooth support with mobile app. Multiple Load Control Modes – Light control, time control, manual control, and more. Reliable Protection – Overcharge, over-discharge, and load protection ensure system safety. Compact & Quiet – Natural cooling design, saving space and reducing noise.
• ✓ Shiner2440 Specifications: MPPT Efficiency: >99% Max.Voltage of Open Circuit: 100VDC MPPT Voltage Range: Battery voltage +2V to 72VDC Max PV Input Power: 520W (12V) 1040W (24V) Battery Voltage: 12/24VDC Battery Type: Lead-acid / Lithium / User-defined Rated Charging Current: 40A Load Type: Resistive, Capacitive, Inductive Load Voltage: Equal to battery voltage Communication: RS485 (default), CAN (optional), Bluetooth (optional) Protection Level: IP32 Operating Temperature: -35°C to 65°C Dimensions: 228 × 160 × 72 mm Weight: 1.75kg
• ✓ Ideal for off-grid solar systems, caravans, and remote applications, the Shiner Series delivers stable and intelligent solar charging performance.

Order the SRNE Shiner2440 40A MPPT Solar Charge Controller online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.

SRNE Shiner2440B 40A MPPT is a precision solar charge controller that protects your batteries and maximises harvest from your panels. An essential part of any well-built solar system. Backed by SRNE, a proven name in solar technology, and supplied with genuine NZ warranty support.

Efficient | Intelligent | Reliable | Bluetooth Enabled

The Shiner Series MPPT Solar Charge Controller is designed for off-grid solar applications, providing high efficiency, advanced protection, and user-friendly operation. Now with Bluetooth connectivity for convenient mobile monitoring and control.

Key Features

• ✓ High MPPT Efficiency – Up to 99.9% tracking efficiency for optimal solar power utilization.
• ✓ Broad Compatibility – Supports 12V and 24V battery systems, including lead-acid and lithium batteries.
• ✓ Smart Connectivity – RS485 and CAN communication, plus Bluetooth support with mobile app for real-time monitoring and control.
• ✓ Multiple Load Control Modes – Light control, time control, manual control, and more.
• ✓ Reliable Protection – Overcharge, over-discharge, and load protection ensure system safety.
• ✓ Compact & Quiet – Natural cooling design saves space and reduces noise.
• ✓ Ideal for off-grid solar systems, caravans, cabins, and remote applications, the Shiner Series delivers stable, intelligent solar charging performance with the convenience of Bluetooth mobile monitoring.

SRNE Shiner2440B 40A MPPT: Full Specifications

Order the SRNE Shiner2440B 40A MPPT Solar Charge Controller online today for fast NZ-wide delivery, or get in touch for volume pricing and expert advice on solar charge controllers and complete solar systems. NZ Depot ships solar equipment to Auckland, Wellington, Christchurch and everywhere in between.

Need advice or a package deal? Contact NZ Depot or browse more solar power and energy deals at NZ Depot.