Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL025-032 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 25-32 mm Adhesive Collar Size 150x150mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 25-32 mm Adhesive Collar Size 150x150mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL025-032 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 25-32 mm Adhesive Collar Size 150x150mm

You are viewing the Trade-Seal 25-32 mm Adhesive Collar Size 150x150mm (SKU: TSEAL025-032). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 25-32 mm Adhesive Collar Size 150x150mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL025-032 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL050-070 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 50-70mm Adhesive Collar Size 230x230mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 50-70mm Adhesive Collar Size 230x230mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL050-070 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 50-70mm Adhesive Collar Size 230x230mm

You are viewing the Trade-Seal 50-70mm Adhesive Collar Size 230x230mm (SKU: TSEAL050-070). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 50-70mm Adhesive Collar Size 230x230mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL050-070 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL075-090 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 75-90mm Adhesive Collar Size 230x230mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 75-90mm Adhesive Collar Size 230x230mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL075-090 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 75-90mm Adhesive Collar Size 230x230mm

You are viewing the Trade-Seal 75-90mm Adhesive Collar Size 230x230mm (SKU: TSEAL075-090). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 75-90mm Adhesive Collar Size 230x230mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL075-090 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL100-110 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 100-110mm Adhesive Collar Size 320x320mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 100-110mm Adhesive Collar Size 320x320mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL100-110 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 100-110mm Adhesive Collar Size 320x320mm

You are viewing the Trade-Seal 100-110mm Adhesive Collar Size 320x320mm (SKU: TSEAL100-110). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 100-110mm Adhesive Collar Size 320x320mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL100-110 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL150-165 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 150-165mm Adhesive Collar Size 350x350mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 150-165mm Adhesive Collar Size 350x350mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL150-165 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 150-165mm Adhesive Collar Size 350x350mm

You are viewing the Trade-Seal 150-165mm Adhesive Collar Size 350x350mm (SKU: TSEAL150-165). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 150-165mm Adhesive Collar Size 350x350mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL150-165 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this PC030-50X20* model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the 16695 Roflex 30-50mm Adhesive 140sq 20 pack (excl tape) is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the 16695 Roflex 30-50mm Adhesive 140sq 20 pack (excl tape), utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the PC030-50X20* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: 16695 Roflex 30-50mm Adhesive 140sq 20 pack (excl tape)

You are viewing the 16695 Roflex 30-50mm Adhesive 140sq 20 pack (excl tape) (SKU: PC030-50X20*). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The 16695 Roflex 30-50mm Adhesive 140sq 20 pack (excl tape) is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the PC030-50X20* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this PC220-270X02* model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the 13617 Roflex 220-270mm c/w adhesive 400sq 2 pack is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the 13617 Roflex 220-270mm c/w adhesive 400sq 2 pack, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the PC220-270X02* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: 13617 Roflex 220-270mm c/w adhesive 400sq 2 pack

You are viewing the 13617 Roflex 220-270mm c/w adhesive 400sq 2 pack (SKU: PC220-270X02*). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The 13617 Roflex 220-270mm c/w adhesive 400sq 2 pack is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the PC220-270X02* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this PC006-12POSTPATCHX5* model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the 13635 Kaflex Postpatch 6-12mm Adhesive 140sq 5pack is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the 13635 Kaflex Postpatch 6-12mm Adhesive 140sq 5pack, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the PC006-12POSTPATCHX5* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: 13635 Kaflex Postpatch 6-12mm Adhesive 140sq 5pack

You are viewing the 13635 Kaflex Postpatch 6-12mm Adhesive 140sq 5pack (SKU: PC006-12POSTPATCHX5*). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The 13635 Kaflex Postpatch 6-12mm Adhesive 140sq 5pack is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the PC006-12POSTPATCHX5* is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection

Technical Verification Required

Ventilation components require precise sizing. Please verify that this TSEAL015-022 model matches your system’s diameter and connection type (e.g., Big End vs Small End) before ordering.

Key Specs:
Category: Flashings – Wall
Type: Secondary Wall Flashing

Maximizing Airflow Efficiency

Whether you are installing a bathroom extractor, a range hood, or a full balanced pressure heat recovery system, the physics of airflow remains the same: air hates friction. Every component in your system, from the ducting to the joiners and grilles, introduces “Static Pressure” (resistance).

Using high-quality components like the Trade-Seal 15-22mm Adhesive Collar Size 150x150mm is crucial for minimizing this resistance. Cheaper, poorly molded fittings or rough-bore ducting can create turbulence, which reduces the extraction rate of your fan. This means your fan has to work harder, creating more noise and using more electricity, while moving less damp air out of your home.

Pro Tip: When connecting ducting, always stretch flexible ducting taut. A saggy duct creates immense resistance. Use rigid joiners and bends where possible to maintain a smooth internal profile for the air to glide over.

Building Code G4 & Healthy Homes Standards

In New Zealand, ventilation isn’t just about comfort; it’s a compliance issue. Under Building Code Clause G4, spaces where people live must have adequate ventilation to prevent mold and moisture buildup. The Healthy Homes Standards further enforce this for rental properties, requiring specific extraction capacities for kitchens and bathrooms.

Ensuring you use the correct diameter components (like 150mm for kitchens) is vital. Using a restrictive component in a 150mm system effectively chokes it down, potentially causing it to fail a flow test. Smooth Air products are designed to meet AS/NZS 4254 standards, giving you peace of mind that your installation is up to code.

Material Selection: PVC vs. Galvanized Steel

Choosing between plastic (PVC) and metal components depends on the application.

• PVC (Plastic): Ideal for residential use, especially in bathroom and laundry extracts. It is lightweight, immune to corrosion (rust), and has a very smooth internal surface for excellent airflow. It helps reduce vibration noise transfer.
• Galvanized Steel: The standard for commercial HVAC and high-temperature applications. It offers superior structural rigidity and fire resistance. If your system passes through fire-rated walls, steel components (often combined with fire dampers) are non-negotiable.

This specific item, the Trade-Seal 15-22mm Adhesive Collar Size 150x150mm, utilizes materials selected for durability and performance in its intended class.

Logistics & Warranty

Secure Shipping: We utilize a “Direct-to-Site” 3PL model. Your order for the TSEAL015-022 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This reduces road miles and handling, ensuring your parts arrive in pristine condition.

NZ Warranty: As a 100% NZ-owned business, all purchases are covered by the Consumer Guarantees Act. Whether you are a trade professional or a DIY homeowner, you are protected against manufacturing defects.

Professional HVAC Supply: Trade-Seal 15-22mm Adhesive Collar Size 150x150mm

You are viewing the Trade-Seal 15-22mm Adhesive Collar Size 150x150mm (SKU: TSEAL015-022). A critical component within our Flashings – Wall range, designed specifically for New Zealand’s residential and commercial ventilation requirements. Sourced directly from the Smooth Air supply chain for NZ Depot.

Technical Specifications & Features

About the Secondary Wall Flashing Series

Secondary wall flashings help make sure water doesn’t slip behind the base flashing and damage your roof. Trade-Seals should be considered a secondary flashing system.
Can be exposed to UV for up to 90 days
Kaflex & Roflex only available from Auckland branch
Freight charges will apply for all deliveries

Understanding NZ HVAC Compliance

When selecting ventilation equipment for New Zealand homes and businesses, compliance with AS/NZS 4254 and UL 181 standards is non-negotiable. The Trade-Seal 15-22mm Adhesive Collar Size 150x150mm is engineered to meet these rigorous safety and performance benchmarks.

Why R-Value Matters

For insulated ducting components, the R-Value (Thermal Resistance) is critical. A higher R-Value ensures that the air travelling through your system maintains its temperature—whether hot or cold—from the unit to the outlet. This reduces energy load on your heat pump or AC unit, lowering electricity bills and increasing system longevity. This product offers an R-Value of (if applicable), ensuring thermal efficiency.

Fire Safety & Materials

Safety is paramount in ceiling spaces and wall cavities. Smooth Air components utilize fire-resistant materials, often featuring a metallized Mylar outer jacket and encapsulated steel wire cores. This construction not only prevents fire spread but also maintains the structural integrity of the ducting under high pressure.

Why NZ DEPOT for HVAC?

🌱 Sustainable Supply Chain Initiative

At NZ DEPOT, we are modernizing the New Zealand trade supply chain. Traditional retail involves shipping products from a manufacturer to a central warehouse, then to a retail showroom, and finally to the customer. This “multi-hop” model adds unnecessary carbon emissions and cost.

By utilizing a Direct-to-Site 3PL model, we eliminate the “Showroom Hop.” Your order for the TSEAL015-022 is routed from the nearest strategic distribution hub (Auckland, Wellington, or Christchurch) directly to your address. This logistical efficiency reduces road miles, lowers our carbon footprint, and allows us to pass significant savings on to you.

🛡️ Warranty & Consumer Protection